The Genesis water softener is one of the best water softener brands available on the market.
The manufacturer of the Genesis water softener is unknown, but a discount water softener is the only company that sells this type of water softener.
The sellers (discount) handle even the warranty and other shipping issues.
Comparison Table
| Name | Image | Regeneration | Where to buy | |
|---|---|---|---|---|
| 1 | Discount Water Softeners Premier 48,000 grain |  | Direct Flow and Upflow Brining | Amazon |
| 2 | Discount Water Softeners Genesis Duo 32,000 Grain |  | Upflow | Amazon |
| 3 | Discount Water Softeners Revolution 64,000 Grain |  | Upflow | Amazon |
| 4 | Genesis EconoSoft Water Softener 24,000 Grains |  | Downflow | Amazon |
All the model of the Genesis is manufactured and assembled in the USA.
In this article, we have done the research and provided an unbiased review of the Genesis water softener.
There are different models of Genesis water softeners. We are going to review
- Genesis Revolution Water Softener
- Genesis Duo water softener
- Genesis Premier Water Softener
- Genesis EconoSoft Water Softener
Genesis water softener reviews
Genesis Up-flow water softener
Products specification
- Capacity-40000, 48000, 64000, 80,000 and 96000 grains
- Demand Metered control head
- 10% Crosslink Resin
- Lifetime warranty on resin and brine tank
- 10- years warranty on the control head
- Upflow regeneration
- Flow Rate 20 GPM @15 psi drop
- Backwash Rate 3.5 GPM
Genesis Revolution water softener uses on-demand metered digital control.
It has a larger internal control valve porting that allows the water to flow through at a higher rate
The system has a flow rate of 20GPM at a 15psi drop.
It provides 20 gallons of water per minute which is suitable for a higher flow rate and larger homes.
The Revolution is designed for homes with more than 4 bathrooms or homes with 5 people or more allowing for more fixtures to be used at the same time
Most demand-metered water softeners regenerate immediately when they reach their recharge capacity, but the Genesis revolution is different.
It features delayed regeneration.
Delay regeneration means the system will allow unsoftened water to pass through the system to your faucet, waiting until the middle of the night for the system to regenerate.
The genesis revolution has advanced technology when it comes to regeneration. When the system reaches 3% of regeneration, it will automatically enter into a short regeneration until 2 am when it will fully regenerate. This way, you will have softened water throughout until full recharge takes place.
In addition to advanced technology, this model has the most advanced features it has to upflow regeneration meaning it only allows the system regenerates the depleted resin.
The upflow regeneration drives away hardness from the resin to the drain instead of the downflow, which forces “dirty” water through the clean-charged resin.
It also features Green Technology that reduces salt discharge by as much as 75% and 64% less water.
The package includes Metered Control, Salt Grid that prevents salt bridging, Safety Overflow float assembly, Quick Connect features on bypass, drain line, power cord, and 2.0 cu. ft. of 10% Crosslink Resin, 1″ unique bypass with integrated turbine meter, 12×52 resin tank, and an 18×33 brine tank that holds over 300lbs of salt.
The brine tank and resin tank have a lifetime warranty, while the control head has a 10-year warranty.
The system features a 7-day automatic flush cycle that flushes out stagnant water preventing bacterial growth.
Other system specifications include an On-Demand control valve with electronic sensors, adjustable cycles, a True 1″ porting design that allows for higher flow rates for larger homes, a large 4-line touchpad LCD display, and a proven seal and spacer design.
If you want this model Genesis revolution but in other capacities, the system has different sizes 32,000, 40,000, 48,000, 80,000, and 96,000 grains
Bonus video of Genesis Revolution
Products specification
- Capacity-32000, 40000, and 48000 grains
- Demand Metered control head
- 10% Crosslink Resin
- Lifetime warranty on resin and brine tank
- 10- years warranty on the control head
- Upflow regeneration
- Flow Rate: 7.2 GPM @ 15 psi drop for 32,000 grains
- Backwash Rate: 4.0 GPM for 32,000 grains
The Discount Water Softeners Genesis Duo is a water softener with complete whole-house filtration using catalytic carbon for chlorine and chloramine removal in a separate tank to optimize performance.
This system features Genesis Premier On Demand Metered Control, 1 Cu. Ft. 10% Crosslink resin, 1″ unique bypass with integrated turbine meter, 9×48 Resin tanks, Large 14×14 brine tank holds up to 200 lbs of salt, Salt Grid prevents salt bridging Safety Overflow float assembly, 1 Cu Ft of Catalytic Carbon 3/4, flow rate 7.2GPMand Tank Tux Jacket reduces tank sweating
When it comes to warranty, the system has a lifetime warranty on the resin tank, brine tank, and salt grid.
The Metered Control head has a 10-year warranty.
It utilizes upflow brining which calculates the exact amount of salt brine required for regeneration. This helps save up to 30% of salt compared to the downflow water softener.
This product also features Automatic System Refresh which flushes out stagnant water after 7-days of non-use, therefore, preventing bacteria growth in your softened water.
- Genesis 2 Premier Water Softener (48,000 grains)
Products specification
- Capacity-24,000, 32000, 40000, 48000, 64000, 80,000 and 96000 grains
- Demand Metered control head
- 10% Crosslink Resin
- Lifetime warranty on resin and brine tank
- 10- years warranty on the control head
- Upflow regeneration
- Flow Rate: 15 GPM @ 15 psi drop- for 48,000 grains
- Backwash Rate: 2.0 GPM- for 48,000 grains
The Premier is a standard flow system. Basically, the Premier is normally used on homes up to 4 bathrooms.
The resin tank comes with a black Tank Tux neoprene tank jacket that reduces tank sweating and the brine tank holds up to 200 lbs of salt.
If you want to purchase a discount Water Softener Tank Jacket (10×44, Black) use the link below
It features Automatic System Refresh which flushes out stagnant water after 7-days of non-use, therefore, preventing bacteria growth in your system.
The Genesis Premier utilizes upflow regeneration and has a control valve with electronic sensors.
Genesis premier is available in different capacity 24,000, 32000, 40000, 48000, 64000, 80,000 and 96000 grains
Genesis Upflow Premier Water Softener bonus video
Genesis downflow water softener
Products specification
- Capacity-24,000, 3200, 40000 and 48000 grains
- Demand Metered control head
- 10% Crosslink Resin
- Lifetime warranty on resin and brine tank
- 7-year warranty on the control head
- Downflow regeneration
Genesis EconoSoft Water Softener uses on-demand metered control. The control features simplified programming, setup, and installation making it easier for DIY’ers.
The package includes:
- 1.25 Cu. Ft. 10% Crosslink Resin which is made in North America
- ¾ and 1 inch Noryl Plastic Threaded connections
- Resin tank which measures 10×44
- Brine tank which measures 13 x34 and holds 220lbs of salt.
- Control Head/Valve
- Salt Grid and Safety Overflow Assembly
The resin tank and brine tank have a lifetime warranty, while the control head/valve has a 7-year warranty.
This type has a capacity of 48,000 Grains which is ideal for families of four and water that does not contain any grains that are relatively hard.
Also, the 48,000 grains supply 8 gallons of water per minute, which is enough to run dishwashers, kitchen faucets, two showers, and a washing machine.
The Econsoft water softener utilizes 10% Crosslink Resin which lasts longer on chlorine water, therefore, making it ideal for tap water.
It is suitable for municipal water because it is pretreated and has fewer grains.
If you want this model but in larger grains, the Econosoft is available in different capacities: 32000 grains, 40000 grains, and 48000 grains.
Terms used in Genesis water softener
Downflow and Upflow brining or regeneration
What is the difference between upflow and downflow water softeners
In Genesis water softeners, there are some systems that regenerate upflow and others that downflow brining.
In a water softener, usually, the resin with the highest hardness (covered with hard water minerals) is at the top and the least hardness is at the bottom.
During the downflow regeneration, the brine flows from top to bottom.
The water comes into the tank through the upper basket and then goes around the tank from top to bottom.
The hardness is discharged outside using the distributor tube to the drain.
Since the high hardness is at the top, the water is distributed from top to bottom.
The water with high hardness flow to the resin with the least hardness.
Sometimes water with high hardness can block the brine from reaching the bottom of the resin bed leaving them without being cleaned which is known as channeling.
Channeling can lead to an ineffective softener. The downflow regeneration requires backflush more often to avoid channeling.
Upflow regeneration the brine flows from bottom to top.
The water flows into the resin tank through the upper basket and then at the bottom of the riser tube to the lower basket attached to the tube.
The water is distributed from the bottom of the tank, which has resin with the least hardness, to the top with high hardness, and then drives hardness minerals away from the resin to the drain.
Upflow brining is efficient, requires less backflush, and uses less salt and water compared to downflow.
Conclusion
The Genesis water softener is capable of removing iron up to 3-3.5ppm as well as softening water. Hardness can be as much as 50-60gpg.
The frequency of regeneration depends on your water usage.
Most models can handle water pressure up to 125PSI
The system can be installed outside as long the cable can reach the electrical outlet. It needs 110V electrical.
Also, it requires to be shielded so the company sells a cover for the control valve which is only purchased on the website, not Amazon.
The model is shipped with the resin already installed in the tank, which has a capacity of fewer than 48,000 grains.
In the tank with grain above 48000, the resin is not preinstalled in the resin tank. It comes packed separately with a funnel for easier installation.
You can use either potassium chloride or sodium chloride on the Genesis water softener.
The system is shipped out with the standard salt setting.
The only thing you need is to adjust the system to high capacity if you are using potassium chloride
The Genesis water softener is used in both private well water and city water. The only thing you need to do is change the setting of the control valve.
If your private water well is high in iron and sediment you need an iron filter and a sediment filter.
All Genesis water softener comes with a bypass valve.
Genesis water softener manual
We have prepared a link to different models of the Genesis water softener manual.
Genesis 2 upflow and premier manual
Genesis upflow and premier manual
Genesis water softener installation
Watch the video of the Genesis water softener set and installation for Genesis upflow, genesis premier, and revolution
Genesis Upflow or Premier Water Softener Programming
Are upflow water softeners better?
The upflow water softener is efficient, requires less backflush, and uses less salt and water compared to the downflow.
What is upflow water softener
Some of the Genesis water softeners regenerate using the Upflow method, while others use Downflow. During upflow, the brine flows in the resin tank from the bottom to the top in a swirling motion.
Best water softener brands reviews
- Fleck Water softener
- GE water softener
- Kenmore water softener
- Morton water softener reviews
- Nuvo water softener reviews
- Pelican water softener reviews
- Water boss softeners reviews
- Whirlpool water softener reviews
- Kinetico water softener reviews
