PH Meter Calibration Powder-Get Accurate Results!

A PH meter calibration powder is used to resist any PH change and maintain a constant even when exposed to a small amount of acid or base.

Comparison table

 ProductImage Available at
1ESEE 6-Pack pH Meter Buffer Solution Powder 2 packages of 4.00, 2 packages of 6.86 and 2 package of 9.18Amazon
2Unido pH Meter Buffer Solution Powder Set3-Pack 4.00pH, 6.86pH, and 9.18pHAmazon
3Beioust 20 Pcs PH Buffer Solution Powder 10 packs pH4.01 and 10 packs pH6.86Amazon
4Jackyee 20 Pcs PH Buffer Solution Powder10 packs pH4.01 and 10 packs pH6.86Amazon
5YUNAWU 1 Set PH Buffer Solution Powder PH For Test Meter Measure Calibration10 packs pH4.01 and 10 packs pH6.86Amazon

The PH buffer powder is necessary for the digital PH meter for calibration.

There are three PH buffer powders.

  • 6.86
  • 4.01
  • 9.18

Acidic buffer is a solution that has a PH of less than 7, or on the acid side, while basic buffer has a PH of higher than 7, or on the alkaline side.

  1. ESEE 6-Pack Meter Buffer Solution Powder
ESEE 6-Pack PH meter calibration powder

Available at

It includes 2 packages of 4.00, 2 packages of 6.86, and 2 packages of 9.18 calibration solution powder for all pH needs.

  1. Unido pH Meter Buffer Solution Set
Unido pH Meter Buffer Solution Set

Available at:

It comes in a 3-Pack for Precise pH Meter Calibration, 4.00pH, 6.86pH, and 9.18pH Solutions.

It is easy to use and Portable.

Also available in 6.86 Set (3 Pack)

  1. Jackyee PH Buffer solution
Jackyee PH Buffer solution

Available at

The Jackyee set includes 20 pieces, 10 packs pH4.01 and 10 packs pH6.86.

  1. YUNAWU 1 Set PH Buffer Powder For Test Meter Measure Calibration

Available at:

Each set comes with 20 packs of popular pH buffer solutions, 10 packs of pH 4.01, and 10 packs of pH 6.86.

  1. Beioust 20 Pcs PH Buffer Solution
Beioust 20 Pcs PH meter calibration powder

Available at:

It comes in 20 packs of popular pH buffer solutions: 10 packs pH4.01 and 10 packs pH6.86.

How to make PH buffer powder into solution

  • Add 250 ml of distilled water to a clean container.
  • Empty the powder (each pack) and add it to the clean container with water.
  • Stir until the powder completely dissolves.
  • The solution is ready for calibration and follows step-by-step to calibrate your PH meter.
  • Same procedure for each pack
  • After stirring each pack, if you are sharing the same item, make sure you rinse the item you are using to stir with distilled water and dry it with a clean tissue or cloth after use/ before moving to the next solution.

All the above Ph meter calibration powders have an indefinite shelf life.

Leave a Comment

Your email address will not be published.