A Water softener is designed to last for 15 to 20 years without replacement. Once the system reaches its life expectancy it becomes easier and less expensive to replace the part than repair or dispose of. Finding the right water softener replacement parts matching your unit help restore the old system efficiency and run smoothly.
Also, the unit part can wear out after softening a large amount of water or someone handles it carelessly. In such incidences, it saves a lot of money to replace the part than repair.
Find out water softener replacement parts for different brands available in the market.
Before we provide you with the water softener parts, let first understand what components does the system has.
What are water softener components?
- Hard water supply pipe- it supplies hard water in the mineral tank.
- Timer and control valve- timer determines when it time to do regeneration while control valve controls the amount of water that enters and leaves the mineral tank and brine tank during regeneration.
- Mineral tanks – the tank is where all water softening process takes place. It contains plastic beads and an outlet manifold.
- Plastic beads- it is a media/resin inside the mineral tanks which has a negative charge which attracts positive charge minerals (magnesium and calcium) in your water that makes your water hard. They usually last 15-20 years.
- Outlet pipe- the pipe is inside the mineral tank that directs softened water out to the house faucet.
- Soft water to house faucet- this is where soft water comes out to your house for human consumption or other uses.
- Brine tank- the tank that contains the brine solution (a mixture of salt and water) used for regeneration.
- Brine solution (salt)- the salt solution used for regeneration
- Float and valve in the brine tank
- Drainpipe- after the hard minerals are washed off on the resin beads there are flushed out of the mineral tank through the drain pipe.
Water softener parts[su_box title=”Resin tank” box_color=”#1a30ba”]
Water softener replacement resin tank
|Name||size||included||shape||where to buy|
|DuraWater brine tank||18x40inches||safety float, lid, brine well with cap, brine overflow elbow, tubing and air check||round||https://amzn.to/2xKPl3Z|
|AFW filter brine tank||18" x 33"||safety float & air check||round||https://amzn.to/2DEeC5n|
|Clack water softener brine tank||11x11x38||safety float||square||https://amzn.to/2DEfwih|
|Nelsen water softener brine tank||18" x 40"||2310 brine valve (safety float), air check, 4" brine well, and cove||round||https://amzn.to/2QeeBGM|
|ABCwaters Brine Tank||11x11||with 2310 Safety Brine Valve and blue bag||square||https://amzn.to/2NcD79m|
|Structural brine tank||14" X 34"||square||https://amzn.to/2QgN2wl|
Replace your damaged tank with a premier resin tank which measures 12″x52″ with 2.5″ opening.
The 2.5″ opening accepts most standard control heads, including Fleck, Autotrol, Clack, and most Culligan control heads
The tank is commonly used on 1.0 ft³ air injection systems, 2 ft³ filtering systems, 64K water softeners, and high-flow salt-free conditioners.
The 602ABC water mineral resin tank measures 10″ x 54″ for the 48K water softener or 1.5 cu. Ft. backwashing filters.
It has a 2.5″ black base and standard 2.5″ opening which accepts most control head. It does not come with a riser tube.
It is available in almond, blue and black color. Both blue and black are available by request.
More 602ABC water resin tank
- 13″ x 54″ Mineral Resin Tank for Filter or Softeners by 602ABC water
- 8″ x 44″ Mineral Resin Tank for Filter or Softener – Almond by 602ABC
The abundant flow water resin tank measures 9″ x 48″, has a base of 2.5inches, and standard opening for most control head to screw on.
It does not come with a riser tube and is almond in color.
A bonus video on How To Replace Your Water Softener Resin, Media, Beads[/su_box] [su_box title=”Brine tank” box_color=”#1a30ba”]
Water softener replacement Brine tank
The Dura water brine tanks for a water softener is complete with safety float, lid, brine well with cap, brine overflow elbow, tubing, and aircheck.
It comes in three different colors (Blue, almond, and black), round in shape, and measures 18×40 Inches.
The AFW filter brine tank is 18″ x 33″ round in shape with safety float and aircheck.
It is available in almond, black, blue, gray, and white. Almond is default color if you don’t choose any other color.
The tank is ready to install and comes with the lid, tubing, brine overflow elbow, and 4″ brine well with the cap.
The Clack water softener brine tank is 11x11x38 inches with safety float and has a 10years warranty.
It comes in blue, almond and black. Blue is the default if you have not requested another color.
The Nelsen water softener brine tank is 18″ x 40″ and comes complete with 2310 brine valve (safety float), air check, 4″ brine well, and cover
The ABCwaters Complete Brine Tank comes with 2310 Safety Brine Valve and a blue bag.
It has different sizes 11X11, 14X14, 18X33, 18×40.
Buy here[/su_box] [su_box title=”Fleck parts” box_color=”#1a30ba”]
Fleck water softener parts
Rebuild kit for fleck 5600 include piston assembly (Fleck part# 60102-00), seal and spacer kit (Fleck part# 60125), and brine valve piston assembly (Fleck part# 60032)
More Fleck rebuild kit
Fleck 5600 Filter Valve Rebuild Kit – Includes Piston (60102-10) and Seals & Spacers (60125)-
Fleck 5600 Replacement Timer & Piston Drive Motor -Part# 18743
This is Replacement Timer & Piston Drive Motor for fleck 5600 & 3200 control valves and 2510 timer mechanism
The AFW filters Fleck 5600 Metered Water Softener on Demand Control Head Valve fits all standard tank,
The control head includes a transformer for connecting to 110 V outlet and has a warranty of five years.
If you are replacing your old fleck 5600 or 2510 Series valve your existing bypass or yoke can be used but on any other brand, you need to purchase bypass valve sold separately.
1″ Yoke fits 5600, 2510, and 9100 fleck control valves sixth and mechanical
Gear and shaft help move piston and timer on the fleck 5600 control valve.
The brine and drain assembly contains all replacements parts for the brine injector and drains components of the Fleck 5600 valve
AFWFilters FP-13244 Brass Brine Fitting BLFC 5600 Water Softener Valve (Fleck Part 13244)
Brass 3/8″ Brine Fitting is used On Fleck 5000, 5600, And 9000 Valves.
It includes O-Ring (Part 12977).
This replacement seal Works with both the 3/4″ and 1″ bypass valves used on Fleck 5600, 2510, 9000, and 9100
Fleck 600049 plastic bypass fits all Fleck 2510, 5600, & 9000 valves
Control valve for Fleck 9100 SXT Twin Tank
More fleck control valve
- Fleck 9000 water softener control valve dual tank replacement head
- Fleck 9000 SXT Digital water softener control valve dual tank replacement head
- Fleck 2510SXT metered water softener head replacement valve
Kenmore water softener parts
The Kenmore brine valve part number 7310197 is compatible with Kenmore water softener
Kenmore bypass valve part no 7129871 fits water softeners in these series: Kenmore 625; Whirlpool WHES; GE GNSF, GXFS, GXSS and PNSF; and Waterworks WS1000
More kenmore bypass valve
- Kenmore 7214383 Water Softener Bypass Valve Genuine Original Equipment Manufacturer (OEM) Part
- Kenmore 7214317 Water Softener Bypass Valve Genuine Original Equipment Manufacturer (OEM) Part Black
- Kenmore 7278434 Water Softener Bypass Valve
Kenmore seal kit part number 7129716 is compatible with water softeners brands such as Kenmore, Kenmore Elite, and Waterworks.
The Seal kit includes the seals, O-rings, and silicone grease needed to prevent leaks from the valve assembly.
Kenmore Water Softener Electronic Control Board parts number 7327827fits Kenmore water softener model 625383500.
It contains an LCD screen
Valve motor helps start your water softener system after receiving a signal from the controller to begin turning the gears.
This valve motor is compatible with the Kenmore water softener.
O-rings are used to seal the valve to the distributor top.
The Kenmore O-rings part number 7112963 is compatible with water softener brands such as Kenmore, Kenmore Elite, Ecodyne, and Waterworks
Kenmore rotor position switches part number 7145186 fits on the side of the cam and gear. It helps detects the position of the rotor valve.
It fits the Kenmore model such as 625348600, 625348670, 625388400, 625388450, 625388460, 62538846003, 625388480, 62538848003, 625388800 and 625388880 and Kenmore Elite. It is also compatible with other brands such as Whirlpool, and Waterworks
Kenmore Elite Rotor Position Switch part number 7305150 is compatible with Kenmore and Kenmore elite models such as 625394260, 625385200, 625383760, 625384200, 625393760, AIF10, 625382080, 625349250, and 625384260.
It also compatible with other water softener brands which include Ecodyne
Kenmore water softener clip works with models such as Kenmore, Kenmore Elite, Ecodyne, Waterworks, and Whirlpool
- Kenmore 7116713 Water Softener Clip Genuine Original Equipment Manufacturer (OEM) Part Black
- Kenmore 7337563 Water Softener Clip Genuine Original Equipment Manufacturer (OEM) Part
The brine tubing carries water flow between the nozzle and venturi and the brine valve.
The Installation adapter tube helps connect a house water supply line to the bypass valve assembly
This installation adapter tube is compatible with Kenmore brands
Kenmore Ground Clamp Kit part number 7248706 is compatible with water softener brands such as Kenmore, Kenmore Elite, Whirlpool, and Ecodyne.
Kenmore nozzle and venturi assembly part number 7187065 is compatible with Kenmore and whirlpool brands
This Kenmore nozzle and venturi assembly (part number 7253808) is compatible with Kenmore, Kenmore Elite, and Whirlpool
Kenmore Nozzle and Venturi Gasket Kit is compatible with Kenmore, Kenmore Elite, Whirlpool, and Ecodyne
Kenmore Nozzle and venturi with gasket part number 7187772 fits Kenmore, GE and Whirlpool water softeners and some Kenmore tannin water filters
Kenmore venturi gasket (part number 7204362) is compatible with Kenmore, Kenmore Elite, Ecodyne and Whirlpool
Kenmore valve motor is compatible with Kenmore, Kenmore Elite, and Ecodyne
Kenmore 7129716 Water Softener Seal Kit Genuine Original Equipment Manufacturer (OEM) Part Black-https://amzn.to/3dsEVb4
This seal kit is compatible with Kenmore, Kenmore Elite, and Waterworks
Kenmore flow plug part number 0521829 works with Kenmore, Ge, Waterworks, and Whirlpool
Kenmore power transformer work with water softener brands such as Kenmore, Kenmore Elite, and Ecodyne
Kenmore valve body cover part number 7171161is compatible with brands such as Kenmore, Kenmore Elite, Ecodyne, Waterworks, and Whirlpool
Rotor and disc part number 7199232 is for Kenmore, Whirlpool, Waterworks, and Kenmore Elite water softener
Clack water softener parts
The clack replacement shut off and float assembly come with float and air check making it ideal for most brine tanks. The aircheck is for use with a fleck valve.
It is large for use up to 40 inches brine tank and
It includes 3/8″ Quick Connect Brine shut off valve that fits standard brine Line size.
This is a complete float assembly for any fleck and clack water softener.
The kit comes with the brine shut off valve, j-tube, and float bobber.[/su_box] [su_box title=”AFW filters parts” box_color=”#1a30ba”]
AFW filters water softener parts
AFW filters H4600 brine tank shut off valve uses 3/8-inch quick connect brine line and 1/2-inch compression pick-up tube connection
Upper basket prevents media from exiting the mineral tanks.
The upper basket for Fleck, Clack, and autotrol Valves
It fits a standard riser tube of 1.05″ diameter.
This flow meter fits Fleck 2510 & 5600 softener.
It contains screws, clips, and o-rings.
Buy here[/su_box] [su_box title=”Control valve” box_color=”#1a30ba”]
Water softener control valve
The control valve head is connected to the resin tank. It is used to control the water flow in the resin tank.
The tool clock control valve is for a 9”-11” diameter water softener resin tank.
It is made of Noryl material which is corrosion-resistant.
Water softener bypass valve
The bypass valve allows you to turn off the flow of water into the water softener or water filter while still allowing water to flow to your home’s faucets.
The bypass valve is used mostly when you want to go for a holiday and you do not want hard water to enter in the system for treatment since no one will be in the house at that time rather than disconnecting your whole system which is tiresome work you only turn off the water flow using bypass valve.
Also, you use a bypass valve when maintaining your water softener like during regeneration or cleaning water softener tanks. You turn off the water flow into a water softener but allows water to flow to your home faucets.
This Water Softener Bypass Valve Assembly Kit includes 3/4″ bypass valve assembly, four black clips, and two installation adaptors with attached O-rings.
The plumbing adaptor connections are 1’’ male pipe threads making it fits standard valve water softener for major brands such as Whirlpool, Kenmore, EcoPure, GE, Morton, NorthStar and more
More bypass valve
Water Softener 1″ Replacement Bypass Valve Assembly Kit – Part # 7345396
Kenmore 7129871 Water Softener Bypass Valve Genuine Original Equipment Manufacturer (OEM) Part for Kenmore, Whirlpool, Waterworks, White[/su_box] [su_box title=”Whirlpool/ Ecopure/GE/Morton and NorthStar” box_color=”#1a30ba”]
Whirlpool/ Ecopure/GE/Morton and NorthStar water softener parts
The below parts are compatible with most major brand water softener such as Whirlpool, Kenmore, EcoPure, GE, Morton, and NorthStar
Water softener motor with screws fits major brands such as Whirlpool, Kenmore, EcoPure, GE, Morton, and NorthStar
This adaptor kit is ¾’’ and has 1” thread for the standard sized water softeners.
Factory original rotor & seal kit fits Whirlpool, Kenmore, EcoPure, GE, Morton, and NorthStar water softener
24 Volt AC Water Softener Power Supply for Whirlpool, Kenmore, EcoPure, GE, Morton, and NorthStar[/su_box] [su_box title=”O-rings” box_color=”#1a30ba”]
It contains a pack of 4-O-rings that are compatible with Whirlpool, Kenmore, and North Star water softener
- Captain (4 Pack) Water Softener O-Ring Seal 7170262 (7083106, 7173016, WS03X10011, 7039068)
- Captain Water Softener O-Ring Seal Kit 7112963 / WS35X10001 for Kenmore, GE, and more Water Systems (Includes P/N: 7170296, 7170254, 7170270)
Other water softener replacement parts
Water softener clip
Kinetic Wares water softener clip is compatible with GE, Kenmore, Eco Pure, Eco Water, Sears, North Star Softeners
Distributor Tube for Softeners
1.050″ Distributor Tube for Softeners and Filters by Nelsen- https://amzn.to/2IniK8o
Water softener parts help your old water softener get back in action and work as designed.
If you are confused/ not sure which water softener part is correct for your system to let us know at the comment section below, and we will be happy to offer assistant.
Also, if you don’t see the water softener part you are looking for please get in touch with your request, we can assist on cost and availability.
Related water softener articles:
- Water softener buying guide
- Salt-free water softener
- Best single tank water softener
- Different types of water softener
- How does a water softener work
- Water softener system cost
- Water softener installation
- Water softener maintenance
- How to clean a water softener
- How to turn off the water softener
- Cabinet style water softener
- Water conditioner vs water softener
- Water softener FAQ
- Kenmore water softener reviews
- Kinetico water softener reviews
- Nuvo water softener reviews
- Water boss water softener reviews
- Morton water softener reviews
- Whirlpool water softener reviews
- Fleck water softener reviews
- Pelican water softener reviews
- Genesis water softener reviews
- GE water softener reviews
- Best water softener for well water
- Do I need a water softener
- Best portable water softener
- How to program water softener
- Twin tank water softener
- Water softener benefits